1
Skip to main content

Wedge Anchors Zinc Coated

Description

The Ankr-TITE Wedge Anchor is a high-strength, fully threaded, and torque-controlled expansion anchor designed for anchoring into normal-weight concrete, lightweight concrete, and grouted concrete masonry. Drill size is the same as the bolt size. Plating is Zinc

 

Wedge Anchor Installation

Drill the hole, whose diameter equals the anchor diameter. To assure full holding power, do not ream the hole or allow the drill to wobble. When possible drill 2 diameters deeper than intended embedment.

Clean the hole with a nylon brush and compressed air.

Assemble the nut and washer onto the anchor. Drive the anchor through the material to be fastened.

Tighten the nut, or head, 3 to 5 turns past the hand tight position. Installing with a torque wrench is recommended for optimum performance.


Length/Size Price/Each Qty
3/8 x 2 3/4 $ 0.92
3/8 x 3 $ 0.95
3/8 x 3 3/4 $ 1.00
1/2"x 2 3/4'' $ 1.50
1/2" x 3 3/4'' $ 1.59
1/2" x 4 1/4'' $ 1.68
1/2" x 5 1/2'' $ 1.80
1/2"x 7'' $ 2.15
1/2" x 10'' $ 4.60
5/8 x 3 1/2 $ 2.60
5/8 x 5 $ 2.95
5/8 x 6 $ 3.10
5/8 x 7 $ 3.79
3/4" x 4 1/4" $ 4.60
3/4" x 4 3/4 $ 4.60
3/4" x 5 1/2 $ 4.60
3/4 x 6 1/4 $ 4.60
3/4 x 7 $ 4.60
3/4 x 10 $ 4.60
1" x 9" $ 4.60
Length/Size Price/Pkg Qty Qty
3/8 x 2 3/4 $ 34.50 50
3/8 x 3 $ 35.63 50
3/8 x 3 3/4 $ 38.00 50
1/2" x 2 3/4'' $ 28.50 25
1/2" x 3 3/4'' $ 29.75 25
1/2" x 4 1/4'' $ 31.75 25
1/2" x 5 1/2'' $ 33.75 25
1/2" x 7'' $ 40.00 25
1/2" x 10'' $ 86.25 25
5/8 x 3 1/2 $ 39.00 20
5/8 x 5 $ 40.50 20
5/8 x 6 $ 46.40 20
5/8 x 7 $ 53.25 20
3/4" x 4 1/4" $ 86.25 10
3/4" x 4 3/4 $ 86.25 10
3/4" x 5 1/2 $ 86.25 10
3/4 x 6 1/4 $ 86.25 10
3/4 x 7 $ 86.25 10
3/4 x 10 $ 86.25 10
1" x 9" $ 60.00 10