1
Skip to main content

5/8'' Wedge Anchor

Installation

Drill hole in base material to your specified embedment depth. Debris from drilling must not interfere with the required embedment depth, the hole that you drill needs to be cleaned out with compressed air.  Alternatively if the concrete thickness allows you can drill hole deep enough to accommodate the required embedment depth and the dust/debris from drilling.  Assemble anchor so the nut is flush with the top of the anchor, place anchor into position through fixture and drive into the hole until the nut and washer are tight against the fixture.

  • DO NOT USE IMPACT WRENCH TO SET ANCHORS
  • OVERSIZED HOLES WILL COMPROMISE ANCHORS PERFORMANCE

Anchor Diameter: 5/8’’

Finish: zinc plated

Drill Bit Diameter: 5/8’’

Min. concrete thickness: 1.5 X embedment depth

Install Torque (ft-lb): 90

Anchor/clip/washer: Carbon Steel

Anchor Tensile Strength: 70,000 PSI

Nut: Carbon Steel ASTM A 563, Grade A


Length/Size Price/Each Qty
3 1/2'' $ 2.10
5'' $ 2.33
6'' $ 3.38
7'' $ 3.05
Length/Size Price/Pkg Qty Qty
3 1/2'' $ 32.65 20
5'' $ 36.20 20
6'' $ 37.00 20
7'' $ 47.20 20
Length/Size Price/Case Qty Qty
3 1/2'' $ 104.48 80
5'' $ 115.84 80
6'' $ 118.40 80
7'' $ 151.04 80