GRADE 5 PLOW BOLTS: Plow bolts have a slightly beveled head with a square neck under the head. The square neck sits in a prefabricated square hole in the steel. This keeps the bolt from turning as a nut is tightened on to the bolt. The length of a Plow bolt is determined by measuring from under the head of the bolt to the base of the threads. Please note you are buying by the pound so confirm your pieces when considering how much to purchase. (##) Number of pieces in 1 pound.
|Material:||Steel||Thread Length:||Full or Partial Threading|
|Head Style:||No. 3 Countersunk||Diameter Of Head:||1.094 - 1.147|
|Proof Load, Lb.:||19,200||Tensile Strength, Lb.:||27,100|
SAE J429 Proof Load and Tensile Strength Requirements Above
Length of a Plow Bolt is measured from the Top of the Head to the Bottom of the Bolt
Country of Origin varies; Country of Origin is subject to change
If plating is important please send an inquiry